Products:


Petroleum Technology, Inc. (“PetroTech”), offers a wide range of mobile, in-plant, and on-line oil purification equipment employing its proprietary vacuum distillation process to utilize an innovative dialysis approach in removing all contaminants (water, particulates and gas). PetroTech’s technological advantage in the field of oil reclamation has gained the company the reputation as being the supplier of leading edge technology in the field of fluid purification.

MORS
Mobile Oil Reclamation System
The MORS series of units (our standard systems), restores hydraulic and industrial oils to purity as good as or better than new without removing additives or affecting physical properties. Using a patented vacuum distillation process, this equipment reclaims mineral based or synthetic oils with viscosities ranging from 50 to 1,500 SSU at flow rates of between 300 to 3,000 gallons per hour.

TLOPS
Turbine Lube Purification Systems
are specifically designed for purification of large turbine lube oil reservoirs. These units are generally sized with a flow rate that permits processing of 100% of the reservoirs capacity per hour. These designs produce very rapid and efficient removal of particulate and water contamination, which result in maintained particulate levels of 15/12 or better, and water levels of 25 ppm or less.
TMORS
Trailer Mounted Oil Reclamation Systems
are completely self contained. Usually supplied with refrigeration condensing, these units are designed for high flow rates with very high water removal rates. This enables the user to quickly service operating machinery with both large and small reservoirs.
EIFPS
Electrical Insulating Fluid Purification Systems
are complete systems designed to quickly and efficiently remove moisture, gas, and particulates from transformer, cable and other electrical insulating fluids. These systems can be supplied for use with both mineral and synthetic fluids. Since it is known that moisture plays a key in maintaining the dielectric levels and aging of these fluids, it is imperative that extremely low moisture levels be maintained within these fluids. The PetroTech process will produce moisture levels of 10 ppm or less, gas levels of 0.25% and particulate levels of 15/12 or better.
All units are available in both mobile and stationary designs. Typical control panels/electrical systems supplied are: NEMA12; NEMA 4; NEMA 4X; and NEMA 7.
Designed By:   TABAN STUDIOS